布帮鞋无浆贴合工艺技术

本工艺是对原有工艺的改进，突破了原有布帮鞋不能采用无浆贴合的局限性，对原有工艺中的不足有了很大的改进，提高了生产效率，改善了鞋子外观质量，增加了鞋子的美观性。     

HA型粘结剂性能评判的研究

冷固结球团直接还原工艺成功的关键因素之一是成型粘结剂的选用。粘结剂性能评判 ,传统的方法是通过考查球团矿的机械强度来说明粘结剂性能的优劣 ,步骤繁锁。经过试验研究 ,本文提出了用粘度大小来评判粘结剂性能的直接方法并从理论上进行了论证。对于 HA型复合粘结剂 ,在六速旋转粘度计上测量 ,50 g复合粘结剂的粘度若大于或等于 6.5× 1 0 -3 Pa·s,表示粘结剂性能较好 ,能满足铁精矿冷固球团直接还原工艺的要求 ;若小于或等于 3.0× 1 0 -3 Pa· s,则表示该粘结剂性能较差。     

影响掺矿渣的钢纤维砼强度的主要因素

研究结果表明 :水胶比、胶凝材料用量、钢纤维掺量、矿渣代水泥量对钢纤维砼强度影响显著。当矿渣取代水泥 10 %时 ,钢纤维砼强度最高。经试验选择出一个具有良好和易性和较高强度 (118MPa)的钢纤维砼配合比 ,为掺磨细矿渣的中含量超短异形钢纤维砼的设计和施工提供了试验依据     

Progress in the development of polymer cholesteric liquid crystal flakes for display applications

Polymer cholesteric liquid crystal (PCLC) flake technology is being developed as an alternative display technology for flexible, reflective particle displays. The motion of PCLC flakes suspended in a host fluid can be controlled with an electric field, creating a way to electrically control the flakes' ability to brightly reflect light that is circularly polarized. The PCLC flake/host fluid dispersion has been successfully microencapsulated both in a polymer matrix and in gelatin micro-capsules. Microencapsulation will not only expand the applications scope of the technology, but also may aid in addressing some potential problem areas that are inherent to many forms of particle display technology. A second important development in PCLC flake technology involves the manufacture of shaped flakes based on soft lithography techniques. The size and shape of a flake impact its reorientation, and uniformly shaped flakes respond in a similar manner. The unique reflective properties of PCLC flakes also provide possible applications in areas such as optics and photonics, switchable ‘smart windows’ or conformal coatings, and information displays such as ‘electronic paper.’     

矿山胶结充填技术的发展

全面介绍了胶结充填技术发展史、胶结充填料类型、充填站设备和胶凝材料种类。充填对提高矿石回采率、改善岩层控制状况和减少废石在地面堆存都是有利的，胶结充填对我国矿山充填采矿具有一定的参考价值。     

核壳乳液聚合中甲基丙烯酸用量对印花制品的影响

采用核壳乳液聚合法合成涂料印花粘合剂，考察了甲基丙烯酸(MAC)用量的改变对印花产品的牢度和色光的影响：在核中，当MAC的用量分别为0．0g，0．2g，0．4g，0．6g时，干摩牢度分别为25，2．5 ，3,0，3．5，色光由暗变亮；在壳中当MAC的用量分别为0．0g，0.2g，0．4g，0．6g时，干摩牢度分别为2.5，2．5 ，3．0，3．5，色光变亮，对得色量和鲜艳度影响不大。     

Influence of Shaping Condition on Etherification Performance of Hβ Zeolite

Etherification reaction of FCC light gasoline over Hβ zeolite was investigated to decrease the light olefins in motor gasoline while enhancing octane. Etherification activity of several molecular sieve catalysts for FCC light gasoline was studied in a fixed-bed reactor. The influence of pore-enlarging agent (PEG) with different molecular weight, binder (γ-Al₂O₃), and peptizing agent (HNO₃) in the shaping process on etherification activity of Hβ zeolite was studied. The impregnating ways of precursor of oxides and the order of extruding and impregnating were also investigated. The results show that the activity of extruded Hβ zeolite before impregnating precursor of oxides is higher than the reverse order. The best shaping condition obtained was PEG-4000 10%, γ-Al₂O₃ 20%, and HNO₃ 10%. At the optimal reaction condition, the conversion of tert-olefins reached the peak. 62.93%, the yield of TAME, is also high and the technology can be applied to industry as well.     

Contact interaction of double titanium and chromium diboride with Fe-Cr alloys

The kinetics of wetting double titanium and chromium diboride by iron-based alloys with different chromium content is studied. It is shown that contact angles are formed in such systems over the range 0–10°. The energy parameters of wetting are calculated. It is established that chromium as a surface-active element promotes Fe-Cr alloy spreading on the diboride surface. The microstructure of the interaction area is studied. It is shown that terminal solid solutions and eutectics are formed in the TiCrB₂-(Fe-Cr) system. The optimum compositions of the metallic binder are determined for TiCrB₂-based composite materials. __________ Translated from Poroshkovaya Metallurgiya, Vol. 46, No. 1–2(453), pp. 109–115, 2007     

THERMAL DEBINDING OF A NEW BINDER

ＴＨＥＲＭＡＬＤＥＢＩＮＤＩＮＧＯＦＡＮＥＷＢＩＮＤＥＲ①ＺｈｏｕＪｉｃｈｅｎｇ，ＨｕａｎｇＢａｉｙｕｎ，ＷｕＥｎｘｉ，ＹｕＬｉｇｏｎｇ，ＱｕＸｕａｎｈｕｉＮａｔｉｏｎａｌＫｅｙＬａｂｏｒａｔｏｒｙｆｏｒＰｏｗｄｅｒＭｅｔａｌｕｒｇｙ，Ｃｅｎｔｒａ...     

聚氨酯/聚丙烯酸酯互穿网络涂料印花粘合剂的制备和应用

本文综述了聚氨酯/聚丙烯酸酯互穿网络(IPN)涂料印花粘合剂。介绍了IPN粘合剂的制备方法及其不同配比时对拉伸强度、断裂伸长率、摩擦牢度性能的影响。IPN粘合剂可克服聚丙烯酸酯粘合剂的延伸性差、湿摩擦牢度低、易吸尘和粘搭性强的缺点,是改进聚丙烯酸酯类粘合剂性能十分有效的方法。